SZE-24YCA 2

　　本機特點：

　　PLC控制，油馬達預塑，全液壓驅動，自動循環;

　　塑化能力高，塑化溫度可預選自控。

　　采用24點計量，使用時根據各工位模具要求，選定注射量。

　　設有空模選擇功能。采用變頻轉位。

　　采用單缸直拉雙聯板剪式合模機構。

　　設有二次壓力注射。設有先后壓楦，合模順序的選擇功能。

　　圓盤轉位平穩，快慢調整方便。

　　圓盤轉位與塑化，注射工作供油分開控制。

　　工位多，定型時間長，易保證鞋底成型質量。

　　可選配伺服節能系統， 可節省電量30%左右。

　　Structure characteristics:

　　PLC controlled,pre plasticized by hydraulic motor,driven by full hydraulic pressure,and cycled automatically.

　　High plastifying capacity,the plastifying temperature can be controlled automatically by preselection.

　　It adopts 24 points measuring and the injection volume can be chosen according to the requirements of the moulds at each working position.

　　The function of empty mould selection has been provided.

　　Parallel mould plate closing mechanism is adopted,which linked with a toggle system operated by single cylinder.

　　The machine is equipped with two time pressure injection system and the cramp pressing and mould closing order selecting function.

　　The round table indexes smoothly and it’s movement can easily be adjusted.

　　The round table rotation,plasticizing and oil supply for the injection are controlled independently.

　　There are many working positions,the time for setting is longenough,andguarantees the setting quality of shoe soles.

　　Selecting servo energy conservation system to save about 30% energy.

　　主要技術參數：

　　以上技術規格僅供參考，如有任何變更或修改，恕不另行通知。

　　Technical specifications are indicative.Machines may undergo variations and/or modifications whithout any previous notice.